Chrome Wolf Note Eliminator:

Tell me about the Chrome Wolf Note Eliminator

The Chrome Wolf Note Eliminator consists of a cylinder of precision made chrome, an interior rubber sleeve that fits around the offending string and a small thumb screw with lock nut.

How do I get the chrome cylinder onto the string?

The chrome cylinder has a 2mm (ave) opening down its length - through which the string slots. If the diameter of the string is too large to fit through the slot - you simply unwind the string from the barrel of the cog until you can slot the eliminator over the string winding - where the diameter is reduced.

How do I get the rubber lining onto the string?

Like the chrome cylinder - the rubber lining has a slit down its length. Placing it onto the string is simply a matter of pulling the slit open with your fingers and feeding it onto the string.

What do I do next?

Slide the chrome cylinder over the rubber lining, insert the thumb screw into the small hole in the centre of the cylinder and then - tighten as necessary. Once you have found the desired position for the Wolf Note Eliminator - secure the device by tightening the lock nut.

Is there anything I should consider when tightening the thumb screw?

Yes - but only one very obvious point. Make sure that the slit in the rubber lining isn’t directly opposite the thumb screw - otherwise the screw will come into direct contact with the string. You don’t want that to happen because besides potentially causing damage to the string - the Wolf Note Eliminator is unlikely to function as intended.

Summary;

This small cylinder of precision made chrome is absolutely essential for those suffering from wolf-note problems. In terms of eliminator design the Chrome Wolf Note Eliminator is a pure thoroughbred.

Stats:

Cylinder Length: 23.0mm (average)
Cylinder Diameter: 11.6mm (average)
Length of thumb screw: 11.0mm (average)
Total Weight: 16.0gms (average)

Price: UK£29.00